Passer au contenu de la page Passer à la navigation Passer au pied de page
Slingshot

CENTRE D'AIDE

3/5/2021
Cruise Control for Model Year 2020 and Newer Slingshot

To set cruise control, the vehicle speed must be above 30 mph (48 km/h). Vehicles with a manual transmission can be set in gears 3 through 5. The set speed will vary slightly in hilly terrain.

Certain factors can affect the vehicle's ability to engage cruise control:

  • The cruise control will not resume a pre-set speed if the resulting acceleration or deceleration rate is too high or too low. For example, resuming a set speed from 30 mph (48 km/h) while in 5th gear may cause the cruise to disengage. 
  • Cruise control may not engage if the brake lights are not operating properly.
  • Cruise control will be disabled if there is an active stability or traction control event. 
  • Cruise control will be disabled if there are multiple wheel speed sensor faults or a communication error with the electronic stability module. 

The cruise control buttons are located on the right side of the steering wheel.

cruise control buttons

 Cruise Control Buttons  Functions
Top Left

 Resume Cruise Control 
Increase Speed

Bottom Left

Set Cruise Control 
Reduce Speed

Top Right Enable Cruise Control

To set the cruise control:

1. Press the top-right Enable Cruise Control button. 
2. Accelerate to the desired speed.
3. Press the bottom-left Set Cruise Control button. 

Once the cruise control is enabled and a cruising speed has been set, use the left-side buttons to increase and reduce cruising speed by 1 mph (1.61 km/h) increments. Press the top-left button to increase speed, and press the bottom-left button to decrease speed. 

To cancel the cruise control:

1. To temporarily cancel the cruise control and allow use of the resume feature, depress the brake pedal. 
2. To cancel the cruise control and erase the set speed from memory, press the top-right button.  

To resume speed:

1. Disengage the cruise control by depressing the brake pedal. Note: If you depress the throttle pedal to accelerate, the cruise control will resume the previously-set speed when the pedal is released. 
2. Press the top-left button to resume operation at the previously-set speed. Note: Pressing the top-right button will erase the set speed from memory and disengage the cruise control. 

For more information, see your authorized Slingshot Dealer. Find a dealer near you with the Dealer Locator.
Maintenance tips, procedures and specifications can be found in your Owner's Manual.
To find diagrams and replacement part numbers, use the online parts catalog.

Mots-clés cruise , control , set , resume , decelerate , accelerate , sl , r ,